DESCRIPTION
• Completely disordered, surface structure is disordered Pock.
• Board drawability and elongation is much better than EDM technology.
• Each hair of the "points" have bosses. As the boss of a transfer rate of about 80%, over the amount of steel is higher than 50% of YAG laser texturing.
• High accuracy, good uniformity, high repeatability, high reliable operation.
• High efficiency, good beam quality. Photoelectric conversion efficiency 28%, the modulation frequency of 500KHz, beam quality M2 value of less than 1.1.
• Lifetime is more than 100,000 hours without failure.
• Texturing process can be set according to the requirements set.
• Roll surface roughness range of 0.5 ~ 15.0μm.
Model | MR-5 | |
Payload | 5 KG | |
Arm Length | 924 mm | |
Number of Axis | 6 | |
| Axis1 | 150 °/S |
Axis2 | 150 °/S | |
Axis3 | 150 °/S | |
Axis4 | 180 °/S | |
Axis5 | 180 °/S | |
Axis6 | 180 °/S | |
| Axis1 | ±175° |
Axis2 | ±175° | |
Axis3 | ±175° | |
Axis4 | ±175° | |
Axis5 | ±175° | |
Axis6 | ±175° | |
Weight | 24kg | |
Liner speed | 2.8 m/s | |
Power consumption | 200 W | |
Input voltate | DC 48 V | |
IP Classification of Robot | IP54 | |
Position Repeatability | 0.02 mm | |
Working temperature | 0-45 ℃ |
Copyright © 2019 Wuhan QUESTT ASIA Technology Co., Ltd. | All Rights Reserved
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.