QA-KZJF is mainly used for automatic forming of flat face mask: the whole roll of cloth is driven by the roller after unwinding, and the cloth is automatically folded and wrapped; the nose beam is pulled and uncoiled by the whole roll, cut at a fixed length and then imported into the wrapped cloth, and the two sides are welded to the seal through ultrasonic welding, and then sealed laterally by ultrasonic, and then cut and formed by the cutter; the mask is transported to the two ear belts of the mask through the assembly line for welding In the working position, the final mask is formed by ultrasonic welding; when the mask is made, it is transported to the flat belt line through the assembly line for collection.
Equipment installation and configuration requirements
(1) Equipment size: 6800mm (L) × 3800mm (W) × 2000mm (H);
(2) Appearance color: international standard titanium warm gray 1C, if there is no special instructions, follow this standard;
(3) Equipment weight: ≤ 5000kg, ground bearing ≤ 500kg / m2;
(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power about 9kw;
(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L / min;
(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR, no combustible, corrosive gas, no dust (cleanliness no less than 100000).
（1）Production Efficiency ： 100-110ppm；
(2) Qualified rate of equipment production: 99% (except that the incoming materials do not meet the requirements and the employees do not operate properly)
(3) Equipment failure rate: 2% (refers to the failure caused by the equipment itself)
Suitable Raw Material
Roll out diameter(mm)
Roll Inner Diameter(mm)
Configuration list of main components
Optical fiber, amplifier
Vlanton / kunluntong
Omron / Hequan
Hello, please leave your name and email here before chat online so that we won't miss your message and contact you smoothly.