Desktop 3W 5W 10W 15W UV laser marking machine for metal glass

3W 5W 10W 15W UV Laser Marking Machine belongs to the series of fine laser marking machines. The marking principle is similar to that of fiber laser marking machine. It uses laser beams to mark permanent marks on the surface of various materials. The effect of marking is to expose the deep material through the evaporation of the surface material, or to "engrave" traces through the chemical and physical changes of the surface material caused by light energy, or to burn off part of the material through light energy, showing the required etching. The pattern, text, and content to be marked on the product. It uses a 355nm ultraviolet laser, which not only has good beam quality (fundamental mode output), but also has a smaller focusing spot (less than 3um in diameter, and the divergence angle is 1/4 of that of the fiber-pumped laser), which can greatly reduce the mechanical properties of the material. Deformation and processing heat effect is minimal, no thermal effect, and no material burning problem, so it is called cold processing, which can realize ultra-fine marking and engraving, and is the preferred product for customers who have higher requirements for marking effect. . It is especially suitable for marking, micro-perforation and surface treatment of materials such as food, pharmaceutical packaging, textiles, and polymer films, high-speed division of glass materials, and complex pattern cutting of silicon wafers.

1. Using high-performance ultraviolet laser (intracavity frequency doubling technology + TEC refrigeration technology), the laser beam quality is superior, bringing users a delicate and beautiful marking effect;

2. Laser beam base film, short pulse width, high peak power, high repetition frequency, small heat affected area, avoid deformation, damage or scorching of the processed material, and high yield;

3. 355nn output wavelength, high photoelectric conversion rate, beautiful engraving effect, good marking effect, good touch feeling, and strong anti-counterfeiting;

The marking speed is fast and the efficiency is high; the whole machine has stable performance, small size, low power consumption, and 24-hour continuous and stable operation;

Configuration:

☆3W UV laser source

☆Visible red beam pilot laser

☆Digital Laser POWER SUPPLY

☆High speed Galvo Head

☆High precision F-θ Lens

☆USB Control CARD

☆Special marking software

☆Laptop Computer

☆Footswitch and Tool Spare

☆Complete Cabinet

☆Conveyor automation system(Optional)

☆Rotary fixture and T

3W 5W 10W 15W UV Laser Marking Machine is suitable for the surface processing of most metal and non-metallic materials and the processing of coating films. Such as hardware, ceramics, glasses and clocks, PC, electronic devices, various instruments, PCB boards and control panels, nameplate display boards, plastics, etc.; suitable for surface and internal engraving of glass and crystal products, such as mobile phone screens, LCD screens, optical devices , automotive glass, etc. 3W 5W 10W 15W UV Laser Marking Machine is especially suitable for surface treatment such as marking and engraving of high flame retardant materials.

3W 5W 10W 15W UV Laser Marking Machine is mainly used for marking and surface treatment of various glass, liquid crystal screens, textiles, thin ceramics, semiconductor silicon wafers, IC grains, sapphire, polymer films and other materials. Processing of high-end market, handicrafts, medicine, cosmetics, video and other polymer materials packaging bottle, the mark is very precise and stands wear, better than ink printing and pollution-free; LCD glass QR code marking, glass wares punching, metal surface coating marking, plastic buttons, communications equipment, electronics, gifts, building materials and so on.